ToAuto Support Center
Here to Help You Make More.
Find product specifications, setup guides, maintenance tips, and troubleshooting help for your ToAuto tools.
Choose Your Product
Select your product category to find the right resources.
Smart Cutting Machines
Metal Melting Furnaces
PRODUCT SUPPORT 01
Smart Cutting Machine
Find the right setup, cutting guidance and care information for your saw.
Lapidary Saw Specifications
Compare our 6" and 8" cutting machines for lapidary and metalworking projects.
Select Your Fit
6" / 150 mm
8" / 200 mm
1.3" / 33 mm
2.36" / 60 mm
400W / ≈0.54 HP
400W / ≈0.54 HP
Brushless DC
Brushless DC
0–5,000 RPM
0–5,000 RPM
50 / 200 RPM increments
50 / 200 RPM increments
14.6" / 370 mm
14.6" / 370 mm
Water cooling
Water cooling
442 × 431 × 296 mm
442 × 431 × 296 mm
Approx. 44.1 lb / 20 kg
Approx. 44.1 lb / 20 kg
Fluorite (Mohs 4) · Turquoise (Mohs 5–6) · Agate (Mohs 6.5–7) · Sapphire (Mohs 9)
Fluorite (Mohs 4) · Turquoise (Mohs 5–6) · Agate (Mohs 6.5–7) · Sapphire (Mohs 9)
Small stones, jewelry & precision trimming
Larger rocks, geodes & lapidary projects
Guides & Downloads
Getting Started
Setup and first cut
RPM & Materials
Speed and cutting tips
Speed and cutting tips
Compatibility and care
User Manuals
Model-specific instructions
FAQs & Troubleshooting
Use this text to share information about your product or shipping policies.
How do I choose the right cutting speed?
The right speed depends on your material, blade diameter, blade specifications, cooling, and feed pressure. Follow the recommendations for your model and blade, and adjust gradually based on cutting performance.
How should I clean my cutting machine?
Disconnect the power before cleaning. Remove cutting slurry, drain the cooling system, and dry the blade and exposed surfaces according to your model's manual.
What should I do if my saw displays an error?
Stop cutting and refer to the error information in your manual. If the problem continues, contact our support team with your model, the displayed error, and a short video if available.
PRODUCT SUPPORT 02
Metal Melting Furnaces
Understand your furnace, choose the right crucible and keep your equipment in good condition.
Which is Right for You ?
Give your customers useful information about your products and showcase differences between them.
First-time metal melting
Small-batch jewelry making
Frequent melting projects
1400W
1400W
1800W
2012°F (1100°C)
2000°F/1100 °C
2012°F (1100°C)
Gold, silver, aluminum, copper
Gold, silver, aluminum, copper
Gold, silver, aluminum, copper
Guides & Downloads
Getting Started
Prepare for first use
Melting Basics
Temperature and materials
Crucible Care
Selection and replacement
User Manuals
Instructions and specs
Frequently Asked Questions
Use this text to share information about your product or shipping policies.
Which metals can I melt?
This depends on your furnace's rated temperature, the metal being processed, and crucible compatibility. Always check your model specifications before use.
How do I choose the right crucible?
Select a crucible compatible with your furnace model and intended metal. Check its dimensions, material, and working capacity before use.
Why is my furnace not heating?
Stop operation and check the power supply and any displayed error according to the user manual. Do not attempt to repair energized electrical components. Contact support if the issue continues.
WE'RE HERE TO HELP
Not Sure Where to Start?
Choosing the right tool? Have a question about cutting, melting, or setup? Tell us what you're working on — our team is happy to help.
Email: support@toautotoolglobal.com