



ToAuto Melting Furnace Crucible & Ingot Mold Set for Metal Melting Furnaces
ToAuto Crucibles & Ingot Mould Accessories for electric and propane melting furnaces. Choose your replacement using the furnace-fit guide below.
Crucible compatibility & material guide
Which crucible fits my furnace?
- SSR, SSR-V1 & TRF3000 electric furnaces: All three models accept the 1KG, 2KG and 3KG crucibles. Choose any of these three sizes for your furnace. View the ToAuto 3+1KG electric melting furnace.
- TRF5000 5KG electric furnace: The 5KG crucible is only for the 5KG TRF5000. It is not compatible with SSR, SSR-V1 or TRF3000 furnaces. View the ToAuto 5KG electric melting furnace.
- 6KG propane furnace: Choose the 6KG clay crucible.
- 12KG propane furnace: Choose the 12KG clay crucible.
Do not substitute the propane clay crucibles for the electric-furnace graphite options. Follow your furnace's loading limits; a KG size label is not a universal safe loading weight for every metal.
Which to Choose?
Choose the 1KG, 2KG, 3KG or 5KG option to match the electric furnace models above.
Clay: Choose 6KG for the 6KG propane furnace or 12KG for the 12KG propane furnace. Neither material name alone guarantees longer service life, cleaner metal or a particular melt purity. Follow the furnace and crucible instructions for your metal and operating temperature.
Can silicon carbide crucibles work in electric melters?
Some silicon carbide (SiC) crucible grades are designed for electric resistance furnaces, but a generic SiC crucible is not a confirmed drop-in replacement for these benchtop systems. Use the compatible graphite option listed above unless ToAuto confirms a specific alternative. Before considering SiC, confirm its grade, dimensions, seating, metal and temperature suitability, and heat-up requirements with both the furnace and crucible manufacturers. A high temperature rating or matching KG label alone does not establish compatibility.
In stock and ready to ship — not a pre-order listing.
Not sure which furnace you have? Contact support@toautotoolglobal.com with your furnace model.
Choose a crucible that matches your furnace model, capacity, and melting application. Always check material compatibility and follow proper handling, heating, and cooling practices to help extend crucible life.
Most orders are processed within 1–3 business days. Delivery times vary by destination, with an estimated 3–7 business days for U.S. orders after dispatch. Tracking details will be emailed once your order ships.
Crucibles are consumable items subject to normal wear during use. If your item arrives damaged or you experience a product quality issue, our support team is here to help. Warranty coverage is subject to the applicable product terms.
Short content about your shipping rates or discounts.

Compare
Compare Melting Furnaces






Electric(Basic)
Electric(Std)
High Electric(HP)
Basic PID
Precise PID
Digital PID
45–60 min
25–35 min
25–35 min
2000°F
2000°F
2100°F
-
1.0 insulation
2.0 insulation
A-base
Hexagonal base
Reinforced hex base
3 kg
3 kg / 5 kg
3 kg
1800 W
1800 W
1800 W
110V / 220V
110V / 220V
110V / 220V
6 Kg
7.5 Kg / 8 Kg
7.5 Kg
10 Things to Know Before Melting Metal
FAQ
How do I care for my crucible and lid for longer use?
High-temperature cycling increases structural stress. Low-density or recycled graphite cracks within 5–10 melts. Our high-purity crucible is rated for 50–100 cycles. Early cracking usually means poor material quality, not user error.
Why does it take 60 minutes to melt copper while others only need 20 minutes?
Real melting speed depends on actual wattage, insulation thickness, and temperature consistency. Some products claim “1800W” but deliver far less. A true 1800W+ furnace melts 300g copper in 20–25 minutes.
Will the furnace smoke, spark, or trigger GFCI during normal use?
No. Smoke, sparks, and frequent GFCI trips indicate electrical or coil insulation faults. A proper furnace uses thick insulation, grounded chassis, GFCI protection, and overheat safeguards.
Will the pliers or molds break or be too small?
Cheap pliers deform above 500°C. Good pliers must hold 1200°C red-hot crucibles safely. Molds under 100g capacity are impractical. A proper kit includes heat-resistant pliers and molds matching the crucible size.
Why do cheap furnaces become more expensive over time?
Thin crucibles, weak insulation, and low-grade electronics wear out faster. Real cost includes power usage, consumables, and downtime — not just the purchase price. Durable systems lower long-term cost per kilogram.
Does “Max 1100°C” mean accurate temperature control?
No. Max temperature ≠ stability. Many units swing ±50°C, causing oxidation and bubbles. A PID controller holds ±5°C accuracy, reducing defects by up to 75%.
How do I reduce carbon buildup inside the furnace?
Carbon builds up when the inner lining is rough. A removable, smooth alumina lining allows quick wiping after each melt and prevents residue from hardening.
Are the instructions difficult for beginners?
Beginners often skip steps like crucible preheating or grounding checks. If unclear, contact support or follow our video tutorials. The wrong operation can cause overheating or cracking.
Can I melt aluminum, silver, or gold?
Yes. Use high-purity graphite crucibles and match temperatures. Avoid cross-contamination by dedicating one crucible per metal.
Testimonials
John S.
Testimonial 1
Share what your customers are saying about your products, customer service or shipping rates.
Mary U.
Testimonial 2
Share what your customers are saying about your products, customer service or shipping rates.
Joshua A.
Testimonial 3
Share what your customers are saying about your products, customer service or shipping rates.
